EN
Aesthetic, durability and utility of the material, is all you need to devise the ideal natural stone that you can incorporate in a project. Two of the ones that are readily identified are those of travertine and quartzite which differ in the most beautifulness and performance. Nevertheless, installation is occasionally reduced to one of the most important real-life fields. We have a history of more than ten years of delivering high quality stone in the world and we know that the ease of installing it is a factor that contributes towards the time schedule, the budget and the finished product at Xiamen Wanshi. It is here that we shall compare these two beautiful stones in the eyes of an installer.
Material and Natural Properties Composition.
The distinction between the two is merely founded on the formation on which they are geologically established and how they are to be handled.
Travertine is a mineral spring deposited limestone. It is porous, light and pitted in surface. It is porous and, thus, it will be covered before and after installation to avoid stains. It is lighter and, therefore, can be cut and fitted in position with less effort.
Quartzite is a metamorphic rock that is composed of sandstone through the intense heat and pressure. It is very difficult and solid and does not have a porous surface in an unfissured surface. It is very tough therefore very hard to scratch and etch yet requires special tools and a diamond that can cut and shape.
Reduction, Faking and Field Work Adjustments.
Convenience on this aspect of easy installation also differs.
Travertine also does not go through this because the production process is not normally difficult. It is pliable so as to be cut using standard stone cutting tools. Less tools wear could be applied in the case of edge profiling and sink cutouts. It may cause reduced time to make and minor flexibility to make last minute during the construction particularly to wall cladding or the flooring patterns.
And of Quartzite in case, it is the two-sided sword of its hardness. Although it produces a very strong final product, it needs very huge machines used in the process of fabrication of the same, which need qualified people to work on. Quartzite can hardly be cut, diamond blades are faster and will warm faster than it does. Adjustments on-site are tedious, and could be reduced to the maximum extent with proper pre-installation templating. This frequently implies that quartzite manufacture should be left to the skilled workforce in the shop as opposed to being experimented with on a mass production off-site.
Handling, Installation Process, weight.
The two stones are natural hefty materials and this requires the abilities of manipulation.
The tiles/slabs made of travertine are heavy and are generally a little less dense compared to quartzite. It is recommended that the installers should pay attention to its porous surface when installing it and that it should not be exposed to grouts and dirt. This process requires the addition of the step of pre-sealing.
Quartzite is also very thick and therefore very heavy. Bigger slabs will need more work and equipment to carry and install them. The weight and structural hardness require that the shape of the sub floor or wall should be flat and powerful as much as possible. There is also less room to make mistakes when laying since once a piece of quartzite is in place it can be changed very little as compared to a piece of travertine tile.
The after-Installation Finishing and Long-Term Care.
The latter activities are also taken into consideration with easy installation.
Once the trauma is applied and the Travertine is sealed, the greater attention to maintenance needs to be practiced. This its finished surface also may gather the patina of time, and this is what many desire. It is however more prone to etching by the acidic substances and may have to be resealed after some time depending on the use.
Being applied and covered by specialists, Quartzite will provide an almost risk-free surface practically. It is not painted, scribed or scratched, thus it acquires one that will be maintained in its polished or honed appearance with minimal care hence this is the cause of most of the homeowners spending on a more refined installation.
Lastly, it is the preparedness, which is predetermined by preparation. So, which is easier to install? Travertine may be slightly less difficult to installers such that it can be cut easily and they are available on the field. But its sealing processes required and its porosity required procedural strictness. Quartzite setting is not as difficult to install and required a lot of precision and professional crafting prior to setting. The former is more difficult to cut and handle, however it is more polished and lasting and cheaper in long term view.
Finally, the other one is less complex but it is your project and installer capability. Xiamen Wanshi also possesses 5-point Quality Monitor system, thus you will be furnished with travertine, or quartzite material of the same caliber, calibration and clean finish. This aspect of quality control at the quarry end also offers an improved starting point with which the task of the installer becomes significantly easier with quality and no-faulty stone to be installed blissfully by a professional.